|
Post by loves2turn on Apr 6, 2008 21:46:49 GMT -5
i talked to David at continental about a camera mount for the inside of my neon..well i had the old non headrest seats but today i picked up some Expresso neon seats with adj headrest..i have seen a few guys running the headrest mounts and im just seein if yall had an easy DIY or maybe a cheap kit or something?
|
|
|
Post by damnyankee on Apr 7, 2008 19:47:39 GMT -5
I made one last year. Basically it was a piece of 1x2 pine, that I cut off enough to stretch from both headrest mounts to the middle of the car. Attached it with some U bolts. Very primative.
With that design, we perfected it and went with an aluminum 1x2, with custom clamps for around the headrest posts.
|
|
|
Post by Sisko99 on Apr 7, 2008 21:48:02 GMT -5
I still have the DY's wood prototype sitting here in my apartment. If you want it...you can have it.
|
|
|
Post by loves2turn on Apr 7, 2008 21:56:32 GMT -5
thanks for the offer but i went out to lowes tonight and got the stuff to do it with.
its a 3/4'' steel square tubing with 2 u bolts and nuts with a bolt to bolt up to my camera..prolly drill and fab it up tommorrow..post pics later
|
|
|
Post by xeric13x on Apr 7, 2008 22:28:05 GMT -5
|
|
|
Post by damnyankee on Apr 8, 2008 19:03:29 GMT -5
|
|