Post by ein86 on Apr 7, 2015 21:01:25 GMT -5
Cobb intake
The silver mark is on the back side of the pipe above the turbo, cant be seen when installed, its from where the intake was hitting the a/c line before I replaced the lower motor mount. I also bent the a/c line by hand to give it more room. If you don't want to replace the motor mount, bending the line alone should give it enough room.
$175
Hawk HP+ front and rear, sold as a set
*Part numbers are shown, please check that they are correct for your car*
Rears should easily make it through another season, front should get you through most of the season. Fronts are about worn about half way, rears have about 3/4 material left.
$60 for both sets of pads
Enkei RPF1 18x8.5, 40mm, 5x108, Gunmetal with Hankook RS-3 v2 255/40/18
Sold
The silver mark is on the back side of the pipe above the turbo, cant be seen when installed, its from where the intake was hitting the a/c line before I replaced the lower motor mount. I also bent the a/c line by hand to give it more room. If you don't want to replace the motor mount, bending the line alone should give it enough room.
$175
Hawk HP+ front and rear, sold as a set
*Part numbers are shown, please check that they are correct for your car*
Rears should easily make it through another season, front should get you through most of the season. Fronts are about worn about half way, rears have about 3/4 material left.
$60 for both sets of pads
Enkei RPF1 18x8.5, 40mm, 5x108, Gunmetal with Hankook RS-3 v2 255/40/18
Sold
